Changes between Initial Version and Version 1 of Resources/Services/RFSwitch


Ignore:
Timestamp:
Mar 18, 2020, 10:49:51 PM (6 years ago)
Author:
jkol
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Resources/Services/RFSwitch

    v1 v1  
     1[[TOC(depth=3)]]
     2
     3= Service: RF Switch =
     4
     5This service is used to configure the RF switch boxes attached to certain nodes in sb1.cosmos-lab.org and sb2.cosmos-lab.org allowing the experimenter to select how nodes and antennas are connected.
     6
     7[[BR]]
     8
     9== Usage ==
     10
     11All the available methods are accessible from the a testbed console via an HTTP API located at `am1.cosmos-lab.org:5054/rf_switch`. This API can be interacted with via a command line tool such as "curl" or any script using a "REST client" library.
     12
     13[[BR]]
     14
     15=== Get the current configuration ===
     16
     17This API call is used to get the current configuration of the RF front end(s) with respect to a node or list of nodes. The response will specify the parameters of the TX chain for the node(s) in question. It will show for a given node's `rf_port`, what `antenna` would be used if it were `connected`, whether the power amplifier (`power_amp`) is on or off, and the lower frequency (`f_lower`) and upper frequency (`f_upper`) of the filters.
     18
     19HTTP API Path: `am1.cosmos-lab.org:5054/rf_swtich/status`
     20
     21Parameters:
     22 ||= '''Name''' =||= '''Decription''' =||= '''Required''' =||= '''Acceptable Input''' =||
     23 ||  name ||  Comma separated list of RF switch box FQDNs  ||  Y  ||  (list of RF switch boxes)  ||
     24
     25[[BR]]
     26
     27==== Example 1 ====
     28HTTP Request:
     29{{{
     30am1.cosmos-lab.org:5054/rf_control/get_tx_path?node=sdr1-s1-lg1.bed.cosmos-lab.org
     31}}}
     32
     33Response:
     34{{{
     35<response status="OK">
     36  <nodes>
     37    <node name="sdr1-s1-lg1.bed.cosmos-lab.org">
     38      <rf_port number="0" antenna="1" connected="true" power_amp="ON" f_lower="4900" f_upper="6200"/>
     39      <rf_port number="1" antenna="3" connected="true" power_amp="ON" f_lower="4900" f_upper="6200"/>
     40      <rf_port number="2" antenna="" connected="false"/>
     41      <rf_port number="3" antenna="" connected="false"/>
     42    </node>
     43  </nodes>
     44</response>
     45}}}
     46
     47In this example, node `sdr1-s1-lg1.bed.cosmos-lab.org` has:
     48* TX of rf_port 0, connected to antenna 1, its power amplifier is on, and the filters are set to 4900-6200MHz
     49* TX of rf_port 1, connected to antenna 3, its power amplifier is on, and the filters are set to 4900-6200MHz
     50* TX of rf_port 2 is not connected to anything
     51* TX of rf_port 3 is not connected to anything
     52
     53
     54[[BR]]
     55
     56==== Example 2 ====
     57
     58HTTP Request:
     59{{{
     60am1.cosmos-lab.org:5054/rf_control/get_tx_path?node=sdr1-s1-lg1.bed.cosmos-lab.org,sdr2-s1-lg1.bed.cosmos-lab.org
     61}}}
     62
     63Response:
     64{{{
     65<response status="OK">
     66  <nodes>
     67    <node name="sdr1-s1-lg1.bed.cosmos-lab.org">
     68      <rf_port number="0" antenna="1" connected="false" power_amp="OFF" f_lower="4900" f_upper="6200"/>
     69      <rf_port number="1" antenna="3" connected="false" power_amp="OFF" f_lower="4900" f_upper="6200"/>
     70      <rf_port number="2" antenna="" connected="false"/>
     71      <rf_port number="3" antenna="" connected="false"/>
     72    </node>
     73    <node name="sdr2-s1-lg1.bed.cosmos-lab.org">
     74      <rf_port number="0" antenna="1" connected="true" power_amp="OFF" f_lower="4900" f_upper="6200"/>
     75      <rf_port number="1" antenna="3" connected="true" power_amp="OFF" f_lower="4900" f_upper="6200"/>
     76    </node>
     77  </nodes>
     78</response>
     79 }}}
     80
     81[[BR]]
     82
     83=== Configure the RF switch ===
     84
     85HTTP API Path: `am1.cosmos-lab.org:5054/rf_control/set_tx_path`
     86
     87Parameters:
     88 ||= '''Name''' =||= '''Decription''' =||= '''Required''' =||= '''Acceptable Input''' =||
     89 ||  name ||  Comma separated list of RF switch box FQDNs  ||  Y  ||  (list of RF switch boxes)  ||
     90 ||  switch  ||  Switch(es) to configure on the RF switch box  ||  Y  ||  1, 2, 3, 4  ||
     91 ||  port ||  Port to select on RF switch  ||  Y  ||  1, 2  ||
     92
     93[[BR]]
     94
     95==== Example 1 ====
     96
     97For `sdr1-s1-lg1` in `bed` testbed, connect TX RF ports 0 and 1 to their respective antennas, turn on the power amplifier, and request a frequency of 2.4-2.5 GHz.
     98
     99HTTP Request:
     100{{{
     101am1.cosmos-lab.org:5054/rf_control/set_tx_path?node=sdr1-s1-lg1.bed.cosmos-lab.org&rf_port=0,1&power_amp=on&f_lower=2400&f_upper=2500
     102}}}
     103
     104Response:
     105{{{
     106<response status="OK">
     107  <message>OK</message>
     108</response>
     109}}}