| 84 | | {!comment |
| 85 | | * The IP addresses for Ethernet Port 1(10G) on the X310s rfdev3-1 and rfdev3-2 were hard-coded to 10.39.6.1 and 10.39.6.2 respectively. To access them from srv3-lg1 or srv4-lg1, configure the network interface enp1s0 of srv3-lg1 to 10.39.1.3 and srv4-lg1 to 10.39.1.4, as follows |
| 86 | | {{{#!shell-session |
| 87 | | root@srv3-lg1:~# ip link set enp1s0 mtu 9000 up |
| 88 | | root@srv3-lg1:~# ip addr add 10.39.1.3/16 dev enp1s0 |
| 89 | | root@srv3-lg1:~# ip addr show dev enp1s0 |
| 90 | | 4: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 qdisc mq state UP group default qlen 1000 |
| 91 | | link/ether f4:52:14:83:b9:30 brd ff:ff:ff:ff:ff:ff |
| 92 | | inet 10.39.1.3/16 brd 10.39.255.255 scope global enp1s0 |
| 93 | | valid_lft forever preferred_lft forever |
| 94 | | inet6 fe80::f652:14ff:fe83:b930/64 scope link |
| 95 | | valid_lft forever preferred_lft forever |
| 96 | | }}} |
| 97 | | } |
