Changes between Version 32 and Version 33 of Tutorials/Wireless/mmwave Paam Agora

Timestamp:

Jul 5, 2023, 5:06:33 PM (2 years ago)

Author:

zhenzhou77

Comment:

—

Tutorials/Wireless/mmwave Paam Agora

@@ -134 +134 @@
 ==== Configure IBM 28GHz PAAM ====
 COSMOS uses the IBM 28GHz PAAM API to configure and initialize the PAAM boards. 
-Under {{{PAAM_Control}}}, use the following command to turn configure the PAAM boards: 
+Under {{{PAAM_Control}}}, use the following command to configure the PAAM boards: 
     {{{#!shell
     root@srv1-lg1:~/PAAM_Control# python3 main.py
     }}}
+The following message will print out to indicate that the PAAM board is being successfully configured:
+    {{{#!shell
+Opened port to FPGA
+Logged in to Petalinux
+Started command parser on Zynq
+sdpar_prog.py /version: Version is PAWR_v1.2.0
+Using baseline FPGA control IP
+Reset the Phased Array
+Initialization of IC 0 was successful
+Initialization of IC 1 was successful
+Initialization of IC 2 was successful
+Initialization of IC 3 was successful
+IC0 current: 2.2629521016617793 status: On
+IC1 current: 1.3685239491691104 status: On
+IC2 current: 0.19550342130987292 status: Off
+IC3 current: 0.07820136852394917 status: Off
+Closed port to Zynq
+Opened port to FPGA
+Logged in to Petalinux
+Started command parser on Zynq
+sdpar_prog.py /version: Version is PAWR_v1.2.0
+Using baseline FPGA control IP
+Reset the Phased Array
+Initialization of IC 0 was successful
+Initialization of IC 1 was successful
+Initialization of IC 2 was successful
+Initialization of IC 3 was successful
+IC0 current: 2.29227761485826 status: On
+IC1 current: 1.3587487781036167 status: On
+IC2 current: 0.15640273704789834 status: Off
+IC3 current: 0.16617790811339198 status: Off
+Closed port to Zynq
+Experiment Started!
+    }}}