Changes between Version 73 and Version 74 of Tutorials/Wireless/mmwave Paam Agora

Timestamp:

Jul 5, 2023, 8:35:04 PM (2 years ago)

Author:

zhenzhou77

Comment:

—

Tutorials/Wireless/mmwave Paam Agora

@@ -40 +40 @@
 * Real-time visualization for the real-time DSP pipeline. 
 
-=== CFO Calibration for PAAM boards ===
-**This section introduces how to calibrate the CFO between the PAAM boards. It is not a necessary step for users who wants to run this tutorial.** \\
-\\
-Since each 28 GHz PAAM board is driven by its own on-board phase lock loop (PLL), the CFO between two 28 GHz PAAM boards needs to be calibrated in order to establish a 28 GHz communication link. \\
-The following shows a coarse CFO calibration scheme: \\
-In **terminal 1**, change the {{{cfoBS}}} value to be **0** in line 15 as:
-    {{{#!shell
-    vim PAAM_Control/main.py
-    }}}
-
-Based on the measurements we performed shown in the following figure, we pre-set the CFO to the PAAM boar
 
 === Tutorial Setup ===
@@ -187 +176 @@
 Notice this program will **hang** there to indicate that the PAAM board is on, if you wish to turn off the ICs on the PAAM boards, please **press {{{CTRL+C}}} once**. 
 
+=== CFO Calibration for PAAM boards ===
+**This section introduces how to calibrate the CFO between the PAAM boards. It is not a necessary step for users who wants to run this tutorial.** \\
+\\
+Since each 28 GHz PAAM board is driven by its own on-board phase lock loop (PLL), the CFO between two 28 GHz PAAM boards needs to be calibrated in order to establish a 28 GHz communication link. \\
+The following shows a coarse CFO calibration scheme: \\
+*In **terminal 1**, change the {{{cfoBS}}} value to be **0** in line 15 as:
+    {{{#!shell
+    vim PAAM_Control/main.py
+    }}}
+*Configure and bring up the PAAM board as described 
+
+
+Based on the measurements we performed shown in the following figure, we pre-set the CFO to the PAAM boar
+
 
 ==== Bring up real-time visualization ====