Changes between Version 9 and Version 10 of Tutorials/Wireless/mmwave Paam Real TimePHY


Ignore:
Timestamp:
Sep 11, 2024, 5:27:30 PM (14 months ago)
Author:
zhenzhou77
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Tutorials/Wireless/mmwave Paam Real TimePHY

    v9 v10  
    143143
    144144
     145==== Configure IBM 28GHz PAAM ====
     146COSMOS uses the IBM 28GHz PAAM API to configure and initialize the PAAM boards.
     147Under the console in **terminal 2**, please run the following 4 commands:
     148    {{{#!shell
     149    <user_name>@console:~$ curl "http://am1.orbit-lab.org:5054/array_mgmt/configure?dev_name=rfdev2-1.sb2.cosmos-lab.org&ics=0&num_elements=16&txrx=tx&pol=h&theta=0&phi=0"
     150    <user_name>@console:~$ curl "http://am1.orbit-lab.org:5054/array_mgmt/configure?dev_name=rfdev2-1.sb2.cosmos-lab.org&ics=0&num_elements=16&txrx=tx&pol=v&theta=0&phi=0"
     151    <user_name>@console:~$ curl "http://am1.orbit-lab.org:5054/array_mgmt/configure?dev_name=rfdev2-2.sb2.cosmos-lab.org&ics=1&num_elements=16&txrx=rx&pol=h&theta=0&phi=0"
     152    <user_name>@console:~$ curl "http://am1.orbit-lab.org:5054/array_mgmt/configure?dev_name=rfdev2-2.sb2.cosmos-lab.org&ics=1&num_elements=16&txrx=rx&pol=v&theta=0&phi=0"
     153    }}}
     154An example message will print out to after each command to indicate that the PAAM board is being successfully configured:
     155    {{{#!shell
     156<?xml version="1.0" encoding="UTF-8"?>
     157<response status="OK">
     158  <action service="array_mgmt" name="configure" ipaddr="10.116.5.2">
     159    <step name="open" duration="3.780022"/>
     160    <step name="initializaition" duration="0.125465"/>
     161    <step name="enabling" duration="0.022732"/>
     162    <step name="steering" duration="0.006349" theta="0" phi = "0" ipaddr = "10.116.5.2" />
     163    <state PAAM_ID="0x23" LO_switch="PLL" if_sw1="0xF" if_sw2="0xF" if_sw3="0xF" if_sw4="0xF" txrx="rx" polarization="v" />
     164    <adc>
     165      <conv index="0" name="1v2" tADC="114" tVolt="0.279" tCurr="0.139"/>
     166      <conv index="1" name="1v5" tADC="214" tVolt="0.523" tCurr="1.046"/>
     167      <conv index="2" name="1v8" tADC="4" tVolt="0.010" tCurr="0.005"/>
     168      <conv index="3" name="2v7_0" tADC="13" tVolt="0.032" tCurr="0.064"/>
     169      <conv index="4" name="2v7_1" tADC="183" tVolt="0.447" tCurr="0.894"/>
     170      <conv index="5" name="2v7_2" tADC="18" tVolt="0.044" tCurr="0.088"/>
     171      <conv index="6" name="2v7_3" tADC="40" tVolt="0.098" tCurr="0.196"/>
     172      <conv index="7" name="3v3_pll" tADC="303" tVolt="0.740" tCurr="0.370"/>
     173      <conv index="8" name="5v_uzed" tADC="276" tVolt="0.674" tCurr="0.674"/>
     174      <conv index="9" name="12v" tADC="140" tVolt="0.342" tCurr="1.140"/>
     175      <conv index="10" name="0V" tADC="0" tVolt="0.000"/>
     176      <conv index="11" name="1V8" tADC="735" tVolt="1.796"/>
     177    </adc>
     178    <step name="status" duration="0.069065"/>
     179    <step name="close" duration="0.100179"/>
     180  </action>
     181</response>
     182    }}}
     183
     184