Changes between Version 7 and Version 8 of Tutorials/Wireless/mmwaveRFSoC

Timestamp:

May 20, 2020, 1:57:44 PM (5 years ago)

Author:

skrimpon

Comment:

—

Tutorials/Wireless/mmwaveRFSoC

@@ -42 +42 @@
 omf stat -t system:topo:allres
 }}}
+ 1. Make sure the RF switch boxes are configured to use RFSoCs (all switches set to port 2)
+{{{#!shell-session
+root@console:~# curl am1.cosmos-lab.org:5054/rf_switch/status?name=rfsw1.sb1.cosmos-lab.org,rfsw2.sb1.cosmos-lab.org
+
+<response status="OK">
+  <rf_switch name="rfsw1.sb1.cosmos-lab.org" num_of_switches="4">
+    <switch number="1" port="2"/>
+    <switch number="2" port="2"/>
+    <switch number="3" port="2"/>
+    <switch number="4" port="2"/>
+  </rf_switch>
+  <rf_switch name="rfsw2.sb1.cosmos-lab.org" num_of_switches="4">
+    <switch number="1" port="2"/>
+    <switch number="2" port="2"/>
+    <switch number="3" port="2"/>
+    <switch number="4" port="2"/>
+  </rf_switch>
+</response>
+}}}
+
+    * If some or all the ports are set to "1", set them to port "2"
+{{{#!shell
+curl "am1.cosmos-lab.org:5054/rf_switch/set?name=rfsw1.sb1.cosmos-lab.org,rfsw2.sb1.cosmos-lab.org&switch=1,2,3,4&port=2"
+}}}
  1. ssh to the nodes, use option -Y for using GUI.
 
@@ -74 +98 @@
 ||  Click "Enable Tx" and "LO leakage Cal"   ||  Click "Enable Rx"                         || 
 ||  [[Image(Sivers_TX_SN0240.jpg, 500px)]]      ||  [[Image(Sivers_RX_SN0243.jpg, 500px)]]      ||
-
-* Make sure the RF switch boxes are configured to use RFSoCs (all switches set to port 2)
-{{{#!shell-session
-root@console:~# curl am1.cosmos-lab.org:5054/rf_switch/status?name=rfsw1.sb1.cosmos-lab.org,rfsw2.sb1.cosmos-lab.org
-
-<response status="OK">
-  <rf_switch name="rfsw1.sb1.cosmos-lab.org" num_of_switches="4">
-    <switch number="1" port="2"/>
-    <switch number="2" port="2"/>
-    <switch number="3" port="2"/>
-    <switch number="4" port="2"/>
-  </rf_switch>
-  <rf_switch name="rfsw2.sb1.cosmos-lab.org" num_of_switches="4">
-    <switch number="1" port="2"/>
-    <switch number="2" port="2"/>
-    <switch number="3" port="2"/>
-    <switch number="4" port="2"/>
-  </rf_switch>
-</response>
-}}}
-
-* If some or all the ports are set to "1", set them to port "2"
-{{{#!shell
-curl "am1.cosmos-lab.org:5054/rf_switch/set?name=rfsw1.sb1.cosmos-lab.org,rfsw2.sb1.cosmos-lab.org&switch=1,2,3,4&port=2"
-}}}
-
 === Execution ===
 ==== Run the experiment ====